Sofirn C8G 2000 Lumens
※ Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to hard-anodized anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.
※ Toughened mineral glass lens with AR coated.
※ The waterproof level: in accordance with IPX8 (submersion 2 meters underwater for 30 minutes).
※ Reverse polarity protection from improper battery installation.
※ Advanced Temperature Regulation (ATR) technology: ATR will adjust the brightness level automatically when the driver temperature reaches 50℃ (122 °F) to prevent overheating.
※ Power Indicator:
-The LED indicator shows power status for 5 seconds when turns on.
-Green if power is good enough, Red if short of power, Flashing Red if running out of power.
-The flashlight turns off automatically if the voltage is lower than 2.7 volt, please recharge battery or insert a new batter.
1 x Sofirn C8G Flashlight
1 x Lanyard
1 x User Manual
The tail switch is the tactical switch, and the side switch is the functional switch.
ON/OFF
Tap the tactical switch to momentarily turn on the light; release it and the light will go out. Fully press the tactical switch to constantly turn on the light; press once again to turn off the light.
Operation Instruction:
The tail switch is the tactical switch, and the side switch is the functional switch.
ON/OFF
Tap the tactical switch to momentarily turn on the light; release it and the light will go out. Fully press the tactical switch to constantly turn on the light; press once again to turn off the light.
Output Selection
Group 1: With the light switched on, single click the functional switch to cycle through Low→Med→High. A fast double click actives turbo mode, as soon as the Temperature on the driver reaches on 50 Celsius, there is a stepdown to high mode.
Group 2: With the light switched on, press and hold the switch switch to ramp up and down. The range is 10LM - 2000LM, it blinks when reaching max or min brightness. Ramping changes direction when press button again within 1.5 seconds, same direction when ramping again after 1.5 seconds. A fast double click directly ramps to turbo mode, as soon as the Temperature on the driver reaches on 50 Celsius, there is a stepdown to high mode.
With the light switched on, 3 fast clicks to activate Strobe mode, press and hold to cycle through Strobe-Beacon-SOS, single click goes back to normal brightness.
With the light switched on, 4 fast clicks change Group 1 to Group 2.
With the light switched off, press and hold side switch and click tail switch to activate Eco mode.
Mode memory: brightness levels will be maintained, it turns on with the remembered mode